Showing posts with label Importing Trucks from the USA into Canada. Show all posts
Showing posts with label Importing Trucks from the USA into Canada. Show all posts

Tuesday, May 13, 2008

Leasing Option Now Available for Canadian Vehicle Importers

UCanImport is pleased to announce that it has negotiated a leasing option for UCanImport Subscribers with one of Canada's largest fleet leasing corporations!

Leases are now available for new or pre-owned passenger cars and trucks that are imported from the USA into all provinces except Quebec.

Previously, leasing was not a purchase option for Canadians looking to purchase and import a vehicle from the United States. For many, this meant that importing was not an option because it required that they purchase the vehicle outright (cash) or through a line of credit or pre-negotiated loan with their local bank.

However, with UCanImport's leasing option, all UCanImport Subscribers can now explore the wider choice of new and used vehicles, as well as preferential pricing available in the United States, knowing that they have leasing as a purchase payment option.

So... Why Lease Instead of Purchase?

First and foremost... if you can save 20% to 50% on the vehicle purchase price simply by importing the vehicle from the United States, these savings would more than offset your vehicle leasing expenses!

Improved Cash Flow - When you buy a vehicle, you pay for the entire cost of the vehicle, regardless of how much you use it. When you lease, you only pay for a portion of the vehicle's cost, which is the amount you use during the term of the lease, as well as an interest amount charged by the leasing firm. Leasing can provide significant cash flow savings (which can then be better invested in appreciating assets) AND it enables you to drive the vehicle of your choice! With improved cash flow, you may even wish to upgrade to a newer and/or higher end vehicle make or model.

To learn more, fill out the short online form now available at:
www.UCanImport.com/Vehicle_Leasing.aspx

A leasing representative will then contact you to assist in determining if a vehicle lease is the right solution for your vehicle importation. Alternatively, you can call (250) 883-0188 (9:00am to 5:00pm Pacific Time only, please).

Sincerely,
Zabin Somani (G.M.)
and the UCanImport "Pit Crew"

UCanImport Publications
"Driven by Knowledge"
-------------------------
info@ucanimport.com
www.UCanImport.com
www.UCanImport.Blogspot.com
-------------------------

Tuesday, April 29, 2008

Import a New Vehicle from the US into Canada

Important Tip To Protect The New Vehicle Purchaser

If you are purchasing a brand new vehicle in the US, particularly one that the dealerships are not allowed to sell you because of manufacturer restrictions - think Audi, Acura, Honda, Toyota, Lexus, BMW, Mercedes Benz, Volvo etc - you can use this tip to protect yourself while getting the car you want.

1. Select the new car and engage a US resident to complete the purchase for you using their US address;

2. Have the purchaser register the vehicle with the DMV and request a Title certificate, ensuring that they put your name as the lienholder;

3. As the lienholder, you will receive the Original Title for the vehicle. This means that you are the owner of the vehicle and the vehicle cannot be sold or transferred without your knowledge;

4. Ask the purchaser to provide you with a Bill of Sale showing the sale of the vehicle from them to you. At the same time, have them supply you with the Bill of Sale that they received from the dealership as this may be required for additional proof of purchase price by the CBSA;

5. Use the Original Title with your name, the Bill of Sale from the "purchaser", and the Vehicle Export Worksheet to submit your documents to the US CBP office where you plan to export your vehicle.

6. Use the Original Title, both Bills of Sale (dealership to purchaser, and purchaser to you) at the CBSA to have the duty, GST, A/C Levy calculated.

Why is this tip useful?

1. It allows you to rest easy at night knowing you hold the original Title to the new vehicle;

2. It allows you to circumvent the manufacturers' selling restrictions imposed on their dealerships;

3. It can be used in any State and keeps you protected when someone else is in charge of buying your car;

How can you increase the value of this tip?

1. Choose to purchase your new vehicle in a State that doesn't have a sales tax, like Oregon;

2. Use your personal exemption of up to $750 to lower the purchase price of the vehicle and therfore your GST and duty payable.








Thursday, April 17, 2008

Bumper Standards On Way To Becoming Harmonized

Proposal Would Have A Positive Impact On Cross Border Vehicle Trade

Vol. 142, No. 12 — March 22, 2008

Regulations Amending the Motor Vehicle Safety Regulations (Bumpers)
Issue and objectives

The proposed amendment to section 215 of Schedule IV of the Motor Vehicle Safety Regulations (see footnote 1) would modify the Canadian safety standard for bumpers via incorporation by reference of similar safety standards from the United States and Europe. This would have the effect of aligning the testing speeds with those of Europe and the United States and provide manufacturers the option of meeting the European safety requirements or the safety and no damage provisions of the United States. This proposed amendment would result in one consistent set of globally regulated test speed requirements for the design of bumpers, which would simplify the task of designing bumpers for vehicles destined for North American and European markets. This proposal would also facilitate the introduction in Canada of the impending Global Technical Regulation for pedestrian safety, being developed under the auspices of the United Nations Economic Commission of Europe (UN/ECE).

Description and rationale

Canada and the United States introduced safety standards for bumpers in the early 1970s. When the Canadian and the U.S. regulations were originally introduced, they were harmonized with a test speed of 5 mph (8 km/h) for front and rear impacts and 3 mph (4.8 km/h) for corner impact tests. However, in 1979, the United States added more stringent requirements that included cosmetic damage criteria, while maintaining the (harmonized) test speed and the original safety components damage protection requirements. In 1982, the United States reduced the speed requirements to 2.5 mph (4 km/h) for front and rear impacts and 1.5 mph (2.4 km/h) for corner impacts, and maintained their cosmetic and safety damage requirements.

In 1983, when the Canadian government proposed an amendment to harmonize the test speeds with those of the U.S. requirements (i.e. 4 and 2.4 km/h), many Canadian stakeholders, such as the public, provincial and territorial governments, media and the insurance industry, were against the proposed test speed reduction. As a result, the harmonization of test speed requirements was not pursued; thus for the past 26 years Canada has had a unique higher speed bumper test requirement for passenger cars.

This higher speed has resulted in some vehicle models not being available to Canadian consumers. In addition, in this period there have been some vehicles sold at the retail level in the United States that have been inadmissible for importation into Canada as they have not met the Canadian bumper requirements.

Manufacturers are presently more concerned with the ability to design vehicles capable of concomitantly meeting the unique higher Canadian test speeds and future pedestrian safety requirements that are being developed internationally, rather than the limitation of vehicle models available on the Canadian market. The Global Technical Regulation is aimed at reducing pedestrian fatalities by requiring that the front upper portion of vehicles be designed to reduce head contact forces when a pedestrian strikes the vehicle. This is accomplished by providing space between the vehicle exterior parts, such as the hood and upper fenders, and the solid structure of the vehicle, such as the motor or frame. In addition to reducing head injuries, the Global Technical Regulation on pedestrian safety will require that the bumpers of vehicles be designed to reduce lower leg injuries.

Manufacturers have strongly noted that a conflict exists in meeting the requirements of the three existing world regulations, ECE regulation number 42, Canada Motor Vehicle Safety Standard 215, and Part 581, Title 49 of the United States Code of Federal Regulations. As the European and Canadian requirements are aimed at improving safety, the intention at the time of introduction of the requirements was to protect the safety equipment of the vehicle, such as the lights, from damage in a low speed collision. The intention of the current U.S. bumper standard is to reduce damage to the bumper system and thus provide American consumers with a lower bumper damage replacement and repair cost, while also maintaining the integrity of the safety systems. Manufacturers have noted that from a design standpoint, there is a conflict between meeting the no damage requirement of the United States, the higher test speed in Canada with no damage to the safety systems and the need for bumpers to be designed to meet impending pedestrian safety requirements. Manufacturers have indicated that it will not be possible to meet all three requirements at once. Further, they have suggested that they would be able to meet the U.S. lower speed and no damage requirements and the pedestrian safety requirements with one design.

This proposal would have a positive impact on international trade as the Canadian requirement for bumper testing would be amended to be the same as the requirements in Europe and in the United States. This amendment would assist Canada with its obligation under the Global Agreement made under the auspices of the UN/ECE. Canada’s commitment to review the Canadian bumper test speed requirements was noted in the summary document of the Global Technical Regulation working group on pedestrian safety that is available at the following site: www.unece.org/trans/doc/2006/wp29grsp/ps-186e.doc.

It is important to note that the design of the bumper systems and the percentage of passenger cars sold in Canada have changed significantly since the introduction of the bumper requirement in the early 1970s. In 1970, almost 83% of the vehicles sold were classified as passenger cars. Today, that percentage has dropped to less than 52% because of the consumer demand for trucks and multi-purpose passenger vehicles, which are not subject to the bumper requirements. In the intervening years, vehicle designs have also significantly changed. Vehicle designs in the 1970s frequently included metal bumpers with simple replacement of sealed beam headlamps. In comparison current designs usually include hidden bumper protection systems with moulded plastic covers and integral unique headlamps designs.

In the 1970s, the Government estimated that there would be a very small reduction in fatalities and injuries as a result of the benefit that people would no longer continue to drive a vehicle with damaged non-functioning lights following a small collision. The intention was for this requirement to result in vehicle designs where lighting and similar safety systems would be protected in a low-speed collision so that they would remain functional should the vehicle owner continue to drive a damaged vehicle. Today, several factors may alter this conclusion, such as the significant increase in sales of trucks and multi-purpose passenger vehicles (almost 500% increase), the significant design changes in bumpers and lighting systems in the past 35 years and the requirement of most police forces to have vehicles towed away from even minor collisions. It is now impossible to determine if the unique Canadian test speed requirement of 8 km/h provides any safety benefit. As there are over 370 pedestrian fatalities per year (a significant portion of the 2 900 fatalities per year on Canadian roads), it is proposed that it is time to refocus road safety efforts away from a higher speed test requirement that protects the vehicle safety systems, to facilitating future pedestrian safety designs. Pedestrian fatalities have remained stagnant since 2001, despite Canada’s national Road Safety Vision 2010 target of a 30% reduction for vulnerable road users. Further information is available in the Road Safety Vision 2010 Mid-Term Review report, viewable at the Canadian Council of Motor Transport Administrators Web site www.ccmta.ca and in the Canadian Motor Vehicle Traffic Collision Statistics, viewable at www.tc.gc.ca/roadsafety.

It is understood that making the front of a vehicle softer to protect pedestrians could result in some additional repair costs, especially considering that most low-speed collisions involve rear-ending other vehicles, such as in bumper-to-bumper traffic. This would have an impact on the insurance industry and, in turn, the consumer. In 2007, the U.S.-based Insurance Institute for Highway Safety (IIHS) released a new (non-regulatory) bumper test protocol to better mimic the performance of a car bumper and to assess under- and override during vehicle-to-vehicle low-speed crashes for all classes of light duty vehicles, with the focus being on damageability and cost of repairs. The impact speed for front and rear full-width impacts is 9.6 km/h and the corner impacts are tested at 4.8 km/h.

This proposed amendment would better serve a greater proportion of the public, as it would facilitate the enhancement in safety for pedestrians without reducing the safety of passenger cars. As the IIHS widely publicizes the results of their test program, Canadian consumers will be able to take advantage of this consumer information as part of their decision-making when purchasing a new vehicle.

Read the full amendment at Canada Gazette

Tuesday, November 27, 2007

Importing A Car?: Canada Customs Is Offering Free Seminars

Dear Readers:

Now you can register online for a free seminar hosted by CBSA to learn the process of importing a car from the US.

"There will be importing seminars for the Canadian public who are interested in learning the process of importing cars into Canada and we're providing them at no charge," CBSA trade compliance officer Alan Barrados said. See complete article at http://www.cbc.ca/consumer/story/2007/11/26/bc-carseminars.html#skip300x250

CBSA will advise you to " check the Transport Canada list online before heading south to shop."

Saturday, November 10, 2007

Importing an Acura MDX from the USA into Canada - RIV Exemption Possibility

Submitted from a UCanImport subscriber from another blog site:

" Just got off the phone with my US dealer who has a stack of 2008 vehicles destined to Canada. He had a 2008 Sienna successfully go over to Canada, even though it was on "the list" as being non-admissible. The Sienna owner had purchased his vehicle pre-November 1st (when the list was released). He had RIV write up an "exception" letter and he was off to the races!"

"I must now contact RIV tomorrow with proof of sale (Oct 10th), which was made prior to the RIV Nov 6th list for my 2008 Tacoma, and they should give me an "exception" letter, as a precedence has now been set!!! I'll let everyone know how I do with this new angle. Cheers!"

UCanImport says: if you have a Bill of Sale dated earlier than October 31st, use this precedence to get your vehicle. RIV cannot make one exception and not honour any others. Based on the public outcry to this new immobilizer standard, we suspect RIV has an exception letter on file for folks who demand it. Call RIV at 1-888-848-8240 and get this letter.

Wednesday, November 7, 2007

Importing a 2008 Model Vehicle from the US into Canada - New RIV Admissibility List

If you are considering importing a 2008 Multipurpose Passenger Vehicle (MPV), Passenger Car, Truck or Three-Wheel Vehicle, you must read RIV updates to admissibility at http://www.tc.gc.ca/roadsafety/importation/VAFUS/list/Section5_4.htm

If the vehicle you are considering is listed as inadmissible it's because it doesn't comply with the Canada Motor Vehicle Safety Standard amendment 114 for Locking and Immobilization Systems and that the vehicle is not equipped with an immobilizer that meets CMVSS 114.

For more information visit RIV or review the admissibility list on their website.

Monday, November 5, 2007

Importing a Truck from the U.S. into Canada: Case Study for Nissan Titan LE Importation

A subscriber to UCanImport has successfully completed the importation of a 2005 Nissan Titan LE Pickup Truck and has provided the following case study for would-be importers of trucks from the US.

http://www.ucanimport.com/show_case_study.aspx?id=5

The step-by-step guide is applicable to both cars and trucks and, in this case, saved the importer about $14,000.00.